| Pokolm offers indexable inserts for machining various materials. This is an overview over our main grades at a glance:
|
| STEEL |
| GRADE |
DESCRIPTION |
RANGE OF APPLICATION |
| P40 PVSR |
842 |
dry- and wet-machining with high feed rates |
| P40 PVGO |
848/844 |
soft steels with medium surface speed |
| P25 PVTi |
850 |
rigid conditions with high feed rates |
|
STAINLESS- & HIGH TEMPERATURE ALLOYS |
| GRADE |
DESCRIPTION |
RANGE OF APPLICATION |
| M40 PVST |
896 |
dry machining with high feed rates |
| P25 PVGO |
897 |
wet machining up to 120 m/min feed rate
dry machining up to 180 m/min feed rate |
| P40 PVGM |
895 |
wet machining with medium surface speed and feed |
|
CAST IRON |
| GRADE |
DESCRIPTION |
RANGE OF APPLICATION |
| K10 PVTi |
860 |
dry machining with moderate surface speed |
| HSC05 PVTi |
835 |
dry finishing with high surface speed under rigid conditions |
| P40 PVSR |
842 |
wet and dry roughing with minimized surface speed and high feed rates |
|
ALUMINIUM, COPPER, ETC. |
| GRADE |
DESCRIPTION |
RANGE OF APPLICATION |
| K10 |
820 |
wet and dry machining , roughing and finishing of non-ferrous materials with high surface speed and extremely high feed rates |
| K10 |
831P |
| K10 PVTi |
880 |
wet and dry machining,
minor application: roughing of high temperature alloys with high feed rates |
|
HARDENED MATERIALS |
| GRADE |
DESCRIPTION |
RANGE OF APPLICATION |
| CBN Steel |
092/892 |
dry finishing with extremely high surface speed under rigid conditions |
| HSC05 PVTi |
835 |
dry machining with high surface speed under amost every condition possible |
| K10 PVTi |
860 |
wet and dry roughing of material of over 58 HRC and unstable conditions |
|
